管式炉中半导体激光器巴条Au80Sn20焊料封装研究

为了提高半导体激光器的封装质量和效率,引入管式炉利用夹具进行批量封装。由于封装质量的好坏直接影响半导体激光器的输出特性和使用寿命,利用MOCVD生长808 nm芯片,重点分析了管式炉温度和封装时间对半导体激光器巴条双面金锡封装质量的影响。利用X射线检测、结电压、光电特性参数和smile效应测试手段,确定了管式炉封装半导体激光器巴条的最优封装条件,为以后的产业化提供了指导意义。     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.     

Rapid quantitative analysis of etoricoxib in human plasma by UPLC‐MS/MS and application to a pharmacokinetic study in Chinese healthy volunteers

A selective and sensitive liquid chromatography–tandem mass spectrometry method was developed for simultaneous determination of etoricoxib in human plasma. Chromatography was performed on an Acquity UPLC HSS T3 column (1.8 μm, 50 × 2.1 mm), with a flow rate of 0.600 mL/min, using a gradient elution with acetonitrile and water which contained 2 mm ammonium acetate as the mobile phase. Detection was carried out on Triple QuadTM 5500 mass spectrometer under positive‐ion multiple reaction monitoring mode. The respective mass transitions used for quantification of etoricoxib and etoricoxib‐d3 were m/z 359.0 → 280.1 and m/z 362.0 → 280.2. Calibration curves were linear over the concentration range of 5–5000 ng/mL. The validated method was applied in the pharmacokinetic study of etoricoxib in Chinese healthy volunteers under fed and fasted conditions. After a single oral dose of 120 mg, the main pharmacokinetic parameters of etoricoxib in fasted and fed groups were respectively as follows: peak concentration, 2364.78 ± 538.01 and 1874.55 ± 367.90 ng/mL; area under the concentration–time curve from 0 to 120 h, 44,605.53 ± 15,266.66 and 43,516.33 ± 12,425.91 ng h/mL; time to peak concentration, 2.00 and 2.50 h; and half‐life, 24.08 ± 10.06 and 23.64± 6.72 h. High‐fat food significantly reduced the peak concentration of etoricoxib (p = 0.001) but had no effect on the area under the concentration–time curve.     

Liquid-Repellent Metal Oxide Photocatalysts

Metal oxide photocatalysts (MOPCs) decompose organic molecules under illumination. However, the application of MOPCs in industry and research is currently limited by their intrinsic hydrophilicity because MOPCs can be wetted by most liquids. To achieve liquid repellency, the surface needs to possess a low surface energy, but most organic molecules with low surface energy are degraded by photocatalytic activity. Herein, current methods to achieve liquid repellency on MOPCs, while preventing degradation of hydrophobic coatings, are reviewed. Classically, composite materials containing MOPCs and hydrophobic organic compounds possess good liquid repellency. However, composites normally form irregular coatings and are hard to prepare on surfaces such as those that are mesoporous or nanostructured. In addition, the adhesion of composites to substrates is often weak, resulting in delamination. Recent studies have shown that the direct grafting reaction of polydimethylsiloxane (PDMS) from silicone oil (methyl-terminated PDMS) under illumination results in a stable polymer brush. This easy and simple grafting method allows us to create stable liquid-repellent surfaces on MOPCs of various types, structures, and sizes. In particular, super-liquid-repellent drops with an underlying air layer can be created on PDMS-grafted nano-/microstructured MOPCs. Potential applications of surfaces combining liquid repellency and photocatalytic activity are also discussed; thus offering new ways of using MOPCs in a wider range of applications.     

Spin Polarization and Spin‐Flip Through Phosphorene Superlattice

The spin‐dependent transport properties, including spin polarization and spin‐flip for phosphorene superlattice in the presence of an extrinsic Rashba spin‐orbit interaction (RSOI) based on the transfer matrix method, are studied. The results show that the number of barriers in the superlattice structure plays a dominant role in output spin polarization, which can be used in designing optimized spintronic devices. In addition, by controlling on the Rashba strength, an incident spin‐up electron can be transmitted as a spin‐down electron. Also, it enables to convert the unpolarized incident electronic beam (with zero spin polarization) into an arbitrary output spin polarization, which plays a significant role in qubit circuits.     

Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Glutathione-capped core-shell structured magnetite nanoparticles: Fabrication and their nonlinear optical characteristics

Core-shell structured magnetic Fe₃O₄@glutathione composite nanoparticles were synthesized and examined using diverse methods including Fourier-transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis, transmission electron microscope, thermogravimetric analysis, and vibrating sample magnetometer analysis. In addition, the nonlinear optical measurements were performed by both open and closed aperture z-scan methods using an aqueous colloidal solution of the fabricated nanoparticles. The colloidal system exhibited a positive nonlinear refractive index because of the self-focusing effect arising from optical re-orientation. Although optical re-orientation is a rare phenomenon in nanocolloids, high polarizability of the enveloping organic ligands caused optical re-orientation of the composite nanoparticles in the electrical field direction of the incident beam. Finally, the effect of external voltage on the nonlinear optical index was further investigated.     

Heat conductivity and Dufour effect in the weakly ionized,magnetized, and kappa-distributed plasma

By using the generalized Boltzmann equation of transport and the first-order approximation of Chapman-Enskog expansion on the κ-distribution function, we study the thermal conductivity and Dufour effect in the weakly ionized and magnetized plasma. We show that the thermal conductivity and Dufour coefficient in the κ-distributed plasma are significantly different from those in the Maxwell-distributed plasma, and the transverse thermal conductivity and Dufour coefficient in the κ-distributed plasma are generally greater than those in the Maxwell-distributed plasma, and the Righi-Leduc coefficient and Hall Dufour coefficient in the κ-distributed plasma are also generally greater than those in the Maxwell-distributed plasma.     

Theoretical studies of the concentration dependences of d–d transition band,g factors,and local distortion for V4+ in Li2O–PbO–B2O3–P2O5 glasses

In this work, the g factors, d–d transition band, local distortion, and their concentration dependences for impurity V⁴⁺ in 20Li₂O–20PbO–45B₂O₃–(15 − x)P₂O₅:V₂O₅ (0 ≤ x ≤ 2.5 mol%) glasses are theoretically investigated by using perturbation formulas of g factors for a tetragonally compressed octahedral 3d¹ cluster. In the light of the cubic polynomial concentration functions for cubic field parameter D_q, covalency factor N, and relative tetragonal compression ratio ρ, the calculated concentration dependences of d–d transition band and g factors for V⁴⁺ show good agreement with the experimental data. With increasing x, N (≈0.7682–0.8165) displays the monotonously increasing trend, whereas ρ (≈6.5–4.2%) and D_q (≈1504.9–1481.1 cm⁻¹) exhibit the decreasing tendencies. The above concentration dependences can be ascribed to the modifications of the V⁴⁺–O²⁻ bonding and orbital admixtures around the impurity V⁴⁺ due to the effects of V₂O₅ doping on the stability of the glass network, the strength of local crystal fields, and the electron cloud distribution.